DIFFLOCKEDTHE REGISTRY NAMED MODEL · 1959–72
NAMED MODELMilitary · AustraliaUnited KingdomAustralia

Series II 109.

General-service 109″ Land Rovers of the Australian Army, bought from around 1960 as near-civilian Series 2s and then as heavily modified Series 2A ¾-ton GS trucks, locally assembled at Pressed Metal Corporation in Sydney and worked from Vietnam-era training areas to the outback.

Drive it in the gameSources & evidence
Series II 109 — front three-quarter view, registry 3D render
BASE VEHICLESeries II 109″BUILT BYPressed Metal CorporationIN SERVICE1959–72OPERATED INAustraliaLAYOUT4 wheels

The record

The Australian Army standardised on the long-wheelbase Land Rover as its light truck in the Series 2 era. The first Series 2 109s, in service from around 1960, were what the Registry of Ex-Military Land Rovers (REMLR) describes as "more-or-less civilian" vehicles, while the Series 2A ¾-ton units supplied from 1963 to 1966 went mainly to specialty conversions — ambulances, fire tenders, survey and workshop bodies — before the definitive Series 2A ¾-ton GS (census 6028) arrived in numbers around 1966–67. Like most Australian-market Land Rovers of the period, the Army's vehicles were assembled from knocked-down kits by Pressed Metal Corporation at Enfield in Sydney, which had held the Rover assembly contract since the mid-1950s and continued building Land Rovers into the 1980s; REMLR records both four- and six-cylinder 109s coming through Pressed Metal Corporation as late as 1971–72.

The Army-pattern GS trucks differed substantially from civilian 109s. The chassis gained extended front spring mounts and rear shackles for extra ride height, an extra outrigger carrying a duplicate 10-gallon fuel tank, longer shock absorbers and 7.50-16 tyres, while the 2.25-litre petrol engine ran twin fan belts. Exterior fittings included the characteristic brushguard ("bull bar"), bridge-classification plate, blackout light, pioneer-tool brackets, NATO trailer socket, twin fuel fillers and a canvas strap for the folded windscreen — the canvas-tilted, bull-barred silhouette the registry model reproduces. Some 109s carried an Army-specification PTO winch made by Bamfords of Victoria.

Early vehicles were delivered in gloss Bronze Green enamel (the British Deep Bronze Green standard); from April 1967 the fleet was over-sprayed in the Australian Army's own flat, infrared-reflective Olive Drab, with white-painted bumper corners and rear diff for convoy work and stencilled load-sign markings. The Series 2 and 2A 109s soldiered on through the Vietnam era and beyond until progressively replaced by Series 3 and, from 1987, Perentie 110 fleets; many survive with collectors and in unit museums.

Specification

MANUFACTURERPressed Metal Corporation ↗
The Rover Company (CKD kits assembled by Pressed Metal Corporation, Enfield, Sydney)
MANUFACTUREDcirca 1960–1972 (Series 2, then Series 2A supply)
ENGINE2.25 L petrol inline-four (Army spec with twin fan belts; some later 2A lots six-cylinder)
COUNTRY OF ORIGINUnited Kingdom / Australia
OPERATED INAustralia
STATUSretired; survivors preserved by collectors and army museums
RECORD KINDNamed model
MODEL LINESeries II
WHEELS4
CATEGORYMilitary · Australia

Catalogue fields describe the vehicle's structure and body as this registry records it. They are not certified factory measurements, and no performance figures are published here.

Variants & colours

Factory colours

  • Deep Bronze Green
  • Australian Olive Drab (lustreless)

Codes on hover. Hex values are representative approximations of period paint unless a source states a measured value.

AI rendering impression

An AI rendering impression starts from the registry's own 3D model of this vehicle, which an image model then paints into a scene. It is an artist's impression of the type, made to give a feel for the vehicle in its element — not a photograph, and not a record of any particular vehicle.

Proportions, fittings, markings, colours and the setting can all drift from the original in the process. For the vehicle's actual details, rely on the registry's 3D renders, the specification and the cited sources on this page.

Where it was

AU Australia1960–1985 · Australian Army GS; Vietnam-era training
  1. BuiltPressed Metal Corporation, Enfield, SydneyAustralia · 1960–1972-33.89, 151.10

Sources

  1. 1Series 2A 109 GS (Australian Army ¾ ton GS: chassis modifications, fittings, gloss Bronze Green then flat Olive Drab, service dates) ↗Registry of Ex-Military Land Rovers (REMLR) · accessed 2026-09-10SOURCE
  2. 2Australian Army Vehicle Colour Schemes and Paint (April 1967 change from gloss Deep Bronze Green to lustreless Olive Drab) ↗Registry of Ex-Military Land Rovers (REMLR) · accessed 2026-09-10SOURCE
  3. 3Who assembled the Landys in OZ (Pressed Metal Corporation, Enfield, Sydney; Rover assembly contract from the mid-1950s; 4- and 6-cylinder 109s assembled 1971-72) ↗AULRO forum · accessed 2026-09-10SOURCE
  4. 4Pressed Metal Corporation ↗Wikipedia · accessed 2026-09-10SOURCE
  5. 5Land Rover Series 2A, 3/4 ton General Service (museum object record for the successor 2A GS type) ↗Australian War Memorial · accessed 2026-09-10SOURCE

Registry record updated 2026-09-16T05:55:32.011Z · status: researched