DIFFLOCKEDTHE REGISTRY BASE MODEL · 1989–92
BASE MODELMilitary · AustraliaAustralia

Perentie 6×6.

The 2-tonne 6×6 member of the Australian Army's Perentie family — a turbo-diesel, triple-axle stretch of the galvanised-chassis Land Rover 110 built by JRA Limited at Moorebank, NSW. Around 700 served from 1989 as cargo trucks, four-litter ambulances, mobile workshops, air-defence vehicles and the SASR's Long Range Patrol Vehicles. A rolled-curtain configuration of the shared soft-top model. Canvas hoops support the roof; side and rear curtains are rolled up and strapped in place.

Build one in the CreatorSources & evidence
Perentie 6×6 — front three-quarter view, registry 3D render
MODEL LINEPerentieBUILT BYJRA Limited (Jaguar Rover Australia)PRODUCED1989–92OPERATED INAustraliaPRODUCTION~700 vehiclesLAYOUT6 wheels

The record

By the late 1970s the Australian Army's fleet of Series 2A and Series 3 Land Rovers was due for replacement, and the Army launched Project Perentie — named after Australia's largest goanna, Varanus giganteus — to select a new family of 1-tonne 4×4 and 2-tonne 6×6 light trucks. Trials commenced in 1981 and formal tenders were called in June 1982; from seven bidders, the Land Rover/Isuzu 110-based contenders were evaluated against the Jeep AM10, the Mercedes-Benz 300GD and the Unimog, with the Toyota Land Cruiser assessed two years later. (The contemporaneous Project Waler was a separate, cancelled program to replace the Army's M113 armoured personnel carriers, not part of the light-vehicle buy.)

The winning tender came from JRA Limited (Jaguar Rover Australia), the Australian licensee and assembler of Land Rover products, whose Perentie team was led by George Fowler at Moorebank, New South Wales. The vehicle was far more than a locally assembled 110: the strengthened chassis was hot-dip galvanised and stressed to survive being lifted by helicopter from a single corner, the axles, gearbox and suspension were uprated, and the British drivetrain gave way to Isuzu's 3.9-litre 4BD1 four-cylinder diesel. For the 2-tonne 6×6, JRA turbocharged the engine (4BD1-T) and engineered a twin rear-axle chassis unique to the Australian contract. The contract's Australian-content requirements kept manufacture and assembly at Moorebank, which Rover Australia operated until the plant closed on 30 September 1992 at the end of the build.

The original order covered 2,500 4×4 (1-tonne) and 400 6×6 (2-tonne) vehicles, with 4×4 deliveries beginning in August 1987 and 6×6 deliveries in March 1989; further contracts in the 1990s, associated with Project Bushranger's interim phase, took the 6×6 total to 699. The 6×6 family comprised cargo trucks (215, plus 32 with winches), four-litter FFR ambulances (94), general maintenance workshop trucks (181), electronic repair (40) and comsec repair (12) vehicles, air defence trucks for RBS-70 detachments (72), crew cabs (26) and 27 Long Range Patrol Vehicles (LRPV) — the heavily armed deep-reconnaissance mounts of the Special Air Service Regiment.

Perenties left the line from 1987 in the Australian Army's post-1967 lustreless olive drab, but early in the production run factory painting switched to the three-colour disruptive-pattern scheme ('Auscam') of camouflage tan and matt black patches over the olive drab base; it had become the official fleet scheme by the time the SASR's 6×6 LRPVs were delivered and was extended across the whole green fleet through the 1990s. Vehicles deployed on United Nations service were repainted overall white, and the SASR's patrol vehicles later wore two-colour desert schemes in Iraq and Afghanistan.

The 6×6 proved exceptionally capable, deploying to Somalia, Timor-Leste, the Solomon Islands, Iraq and Afghanistan — where SASR LRPVs operated deep inside hostile territory. Lacking protection against land mines and improvised explosive devices, the fleet was progressively replaced by Mercedes-Benz G-Wagons (including 6×6 variants) under Project Land 121, with large-scale disposals from about 2013. Surviving LRPVs are preserved at the Australian War Memorial and the Army Museum Bandiana, and surplus 6×6s are prized by collectors and expedition builders.

Specification

MANUFACTURERJRA Limited (Jaguar Rover Australia) ↗
Moorebank, NSW — under Land Rover licence
MANUFACTURED1989–1992 (deliveries from March 1989; further batches in the 1990s)
ENGINEIsuzu 4BD1-T 3.9 L turbocharged diesel inline-four
PRODUCTION RUN~700 vehicles (699 across the listed 6×6 variants)
COUNTRY OF ORIGINAustralia
OPERATED INAustralia
STATUSretired from ADF service (replaced by Mercedes-Benz G-Wagon under Project Land 121, disposals from c. 2013); widely sold surplus
PAYLOAD2 tonnes
CHASSISstrengthened, hot-dip galvanised, twin rear axles (6×6); rated for single-point helicopter lift
VARIANTScargo (215), cargo winch (32), ambulance 4-litter FFR (94), general maintenance (181), electronic repair (40), comsec repair (12), LRPV (27), air defence (72), crew cab (26)
RECORD KINDBase model
MODEL LINEPerentie
FAMILYPerentie 6×6
WHEELS6
BODY STYLESoft rolled
VARIANTS1
CATEGORYMilitary · Australia

Catalogue fields describe the vehicle's structure and body as this registry records it. They are not certified factory measurements, and no performance figures are published here.

Factory colours · pick one to repaint the renders

Codes on hover. Hex values are representative approximations of period paint unless a source states a measured value.

AI rendering impression

An AI rendering impression starts from the registry's own 3D model of this vehicle, which an image model then paints into a scene. It is an artist's impression of the type, made to give a feel for the vehicle in its element — not a photograph, and not a record of any particular vehicle.

Proportions, fittings, markings, colours and the setting can all drift from the original in the process. For the vehicle's actual details, rely on the registry's 3D renders, the specification and the cited sources on this page.

Where it was

AU Australia1987–2012
  1. BuiltJRA Limited, MoorebankAustralia · 1989–1992-33.93, 150.95

Sources

  1. 1Perentie 6x6 General Service (GS) — nomenclature and liability codes 74800/74810, 2-tonne payload, three in cab and twelve in the tray, 600 km range, outward-facing bench seats, 'Number Built: 231 and 59 with Winch', Bushranger contract note ↗Registry of Ex-Military Land Rovers (REMLR) · accessed 2026-09-10SOURCE
  2. 2Land Rover 110 — 6x6 General Service ARN register (235 'Truck, Cargo, Light, MC2' and 57 winch vehicles listed) ↗Registry of Ex-Military Land Rovers (REMLR) · accessed 2026-09-10SOURCE
  3. 3Perentie 6x6 Ambulance — records that the ambulance module mounts to the chassis 'in the same manner as the cargo tray body' ↗Registry of Ex-Military Land Rovers (REMLR) · accessed 2026-09-10SOURCE
  4. 4Land Rover Perentie — variant table giving 6×6 cargo 215 plus 32 with winch of 699 6×6s; turbocharged 4BD1-T, March 1989 deliveries, Land 121 replacement ↗Wikipedia · accessed 2026-09-10SOURCE
  5. 5Ex-military Land Rover 110 Perentie 6x6 — dates Perentie production to 'May 1986 and Sep 1992, and by BAeA under licence between 1996-98' ↗4X4 Australia · accessed 2026-09-10SOURCE
  6. 6Australian Army Vehicle Colour Schemes and Paint — olive drab to Auscam changeover through the 1990s; overall white for United Nations service ↗Registry of Ex-Military Land Rovers (REMLR) · accessed 2026-09-10SOURCE
  7. 7Land Rover Perentie (trials from 1981, tenders June 1982; 6×6 deliveries from March 1989; variant details) ↗Truck Encyclopedia · accessed 2026-09-09SOURCE
  8. 8For Sale: An Australian Army Land Rover Perentie – The 'Toughest Land Rover Ever Made' (turbocharged 6×6, 2-tonne rating, Project Bushranger second run) ↗Silodrome · accessed 2026-09-09SOURCE
  9. 9Who assembled the Landys in OZ (Rover Australia's Moorebank assembly plant closed 30 September 1992) ↗AULRO forum · accessed 2026-09-09SOURCE
  10. 10Project Waler (separate, cancelled 1980–85 M113 replacement project — not part of the light vehicle buy) ↗Wikipedia · accessed 2026-09-09SOURCE
  11. 11
    Series I front body review — series1-bronze and Series I configurations · HERITAGE-FLEET-REFERENCES.md

    User photographs `s1.jpeg`, `imagesj.jpeg`, `25109914-1-55.jpg` and `s1_.jpeg` show the early Series I front: a narrow central wire-mesh radiator grille with inboard headlamps, broad flat-sided wings rolling over a long front radius, one small white sidelight per wing, and a bonnet tapering forward with rounded long side pressings. The shared Series I builder uses these proportions for both wheelbases. This is a visual reference interpretation, not a measured CAD scan.

    NOTES
  12. 12
    Series III front review — standard Series III configurations · HERITAGE-FLEET-REFERENCES.md

    User references `hfhimages.jpeg`, `imagesl.jpeg`, and `IMG_1992-jpg.webp` show the tall tapered central plastic grille with shorter side vents, recessed radiator panel, broad wings with rounded leading edges, inboard wing headlamps and white sidelights above amber indicators. The standard Series III bonnet narrows toward the grille. Stage 1 V8 and Santana retain their distinct flush-front grilles. Meteor Works uses a **Series III front**, not the Series IIA front of the army and RAF Marshall ambulances. Its internal `marshal-series3` shell shares the Marshall coachwork but inherits Series III wings, bonnet, grille, headlamps and outer lamps. Meteor adds only its weathered livery, guard and emergency equipment around that standard front, avoiding duplicated headlamp pods. ### Coachwork front-panel corrections - The Shop Truck and the Marshall family (including Meteor Works and RAF rescue) retain clipped curved side skins through the front wings and doors at their custom body joins. - Queen Elizabeth II’s Series IIA station wagon uses the Series III-style wing-mounted headlights, bonnet and broad black grille shown in the supplied reference. No numberplate is modelled. Reference: `

    NOTES

Registry record updated 2026-09-16T05:55:32.105Z · status: researched